Ford Transit Inlet Camshaft BK2Q-6A270-AA for 2.2 TDCi
The Ford Transit Inlet Camshaft with OE reference BK2Q-6A270-AA is used in Ford 2.2 TDCi diesel engines fitted to Transit V348, V362 and V363 platforms. This camshaft controls intake valve timing and lift, directly affecting cylinder filling, combustion stability and cold-start behaviour under load.
In workshop practice, inlet camshaft wear on 2.2 TDCi engines often presents as uneven idle, increased mechanical noise at low rpm, or timing deviation codes after high mileage operation. Replacing the inlet camshaft during engine overhaul or timing system repair helps restore correct valve events and reduces abnormal valvetrain stress.
This Ford Transit Inlet Camshaft is supplied as an aftermarket replacement to OE BK2Q-6A270-AA, intended for professional repair environments and engine rebuild applications.
Technical Specifications
| Specification | Details |
|---|---|
| Product Name | Ford Transit Inlet Camshaft |
| OE Part Numbers | BK2Q-6A270-AA |
| Engine Platform | Ford 2.2 TDCi Diesel |
| Vehicle Platform | Transit V362 |
| Camshaft Type | Intake (Inlet) |
| Warranty | 12 months or 12,000 miles from the date of Ex-factory |
| Packing | Neutral Packing or Customer Required |
| MOQ | 5 pcs |
| Packing Quantity | 5 pcs per box |
| Place for Origin | Ningbo City of China |
| Brand | Wellgine |
Technical Insights for the Ford 2.2 TDCi BK2Q-6A270-AA Camshaft
The Ford 2.2 TDCi BK2Q-6A270-AA Camshaft is a hollow-tube design, which reduces rotational inertia but requires high-strength bonding between the lobes and the shaft. If a vehicle has experienced a timing chain jump or a snapped oil pump drive, the sudden stop often shears the internal structure of the camshaft. Replacing it with an BK2Q-6A270-AA intake camshaft that meets OEM hardness specifications is the only way to ensure the long-term survival of the valvetrain.
During the reassembly of a Ford Transit 2.2 camshaft, technicians should pay close attention to the camshaft carrier alignment. Even a slight deviation can cause localized heating on the journals. Our Ford 2.2 Diesel Intake Cam is precision-ground to a mirror finish, reducing the initial “run-in” wear and ensuring that oil film thickness is maintained even at high operating temperatures common in heavy-load transit applications.
Why Source Your Ford Transit 2.2 TDCi Inlet Camshaft OE BK2Q-6A270-AA Replacement From Us?
As a specialist factory based in China, we bypass the traditional multi-tier distribution model to provide direct access to OEM quality 2.2 TDCi camshaft wholesale pricing. We understand that engine rebuilders and traders in the European market require consistency.
- Precision Manufacturing: Each Ford Transit V363 BK2Q-6A270-AA OEM Intake Camshaft is checked for run-out and lobe profile accuracy using CMM equipment.
- Factory Direct Logistics: While we do not hold stock within Europe, our direct-from-factory shipping ensures you receive the latest production batches. This allows for stable supply chains for large-scale Ford Transit V348 V362 V363 2.2 TDCi intake camshaft replacement projects.
- Rebuilder Focus: Our products are specifically balanced to support 2.2 TDCi Diesel Camshaft Performance, ensuring no harmonic vibrations occur that could lead to premature timing chain wear.
FAQ
1. Can I use this inlet camshaft in the exhaust position by mistake?
No. Inlet and exhaust cams on the Duratorq 2.2 have different lobe lift values and duration profiles. Fitting an intake cam into the exhaust position leads to valve-to-piston contact during the first few revolutions. The exhaust camshaft carries a different OE number — check before you order.
2. Which engines use the Ford Transit Inlet Camshaft BK2Q-6A270-AA?
This inlet camshaft is used on Ford 2.2 TDCi diesel engines fitted to Transit V348, V362 and V363 platforms. It is designed for intake valve operation only and matches the factory valve timing configuration for these engines.
3. Is BK2Q-6A270-AA an intake or exhaust camshaft?
BK2Q-6A270-AA is an intake (inlet) camshaft. It is not interchangeable with the exhaust camshaft. Lobe profile, timing angle and oil feed design differ between inlet and exhaust positions.
4. Can this camshaft be used as a direct replacement for the original Ford part?
Yes. This Ford Transit Inlet Camshaft is supplied as an aftermarket replacement corresponding to OE reference BK2Q-6A270-AA. It is intended for direct installation following standard Ford service procedures.
5. Can replacing the inlet camshaft solve Ford Transit 2.2 engine rattling noise?
If the noise is caused by cam lobe or journal wear, replacing the inlet camshaft typically resolves the issue. However, timing chain, tensioner and tappets should be checked at the same time to avoid repeat complaints.
6. Is this camshaft suitable for full engine rebuilds?
Yes. The Ford Transit V363 BK2Q-6A270-AA OEM Intake Camshaft is commonly used during complete 2.2 TDCi engine rebuilds, especially where cylinder head components are being renewed.
7. Is this camshaft compatible with earlier or later Ford diesel engines?
No. This BK2Q-6A270-AA intake camshaft is engine-specific. It is not suitable for Ford 2.0 TDCi, 2.4 TDCi or petrol engine platforms.
8. Can this camshaft be supplied for wholesale or trade orders?
Yes. This product is available for OEM quality 2.2 TDCi camshaft wholesale supply, suitable for distributors, engine rebuilders and trade customers.
9. Is this an OEM quality aftermarket camshaft?
The camshaft is manufactured to OEM dimensional and functional standards for aftermarket replacement. It is intended for professional use rather than retail DIY applications.
10. Can this camshaft be used on high-mileage fleet vehicles?
Yes. It is commonly used on high-mileage Ford Transit 2.2 TDCi fleet vehicles, particularly during top-end overhauls or noise-related repairs.
11. Do you offer technical support for professional installers?
Yes, we provide comprehensive technical support including installation guidance, torque specifications, timing procedures, and troubleshooting assistance. Our engineering team offers direct support to B2B partners to ensure successful installations and customer satisfaction.
12. How do I verify compatibility with specific engine codes?
Provide your vehicle’s VIN, model, year, and engine type, and we will verify compatibility free of charge to ensure you order the correct part.
13. What is your terms of delivery and payment?
EXW, FOB. Generally, 30% T/T deposit, and balance 70% T/T balance before delivery.
14. What is the ordering process and delivery time?
Please contact our sales team via the website or email for bulk pricing and quotations. Stocked items are shipped promptly, and special orders can be arranged with agreed delivery schedules.For the complete step-by-step ordering process, and our full terms, please view our Service Page.