Mercedes-Benz M271 Intake Camshaft A2710501401 2710501401

Technical Specifications – Mercedes-Benz M271 Inlet Camshaft

What are the causes and symptoms of camshaft failure?

1. M271 Camshaft Symptoms & Rattling Noise Issues

Understanding M271 camshaft symptoms is crucial for timely diagnosis and preventing catastrophic engine damage. The M271 camshaft rattling noise affects thousands of vehicles:

• M271 Camshaft Rattling Noise (Cold Start): Characteristic metallic rattling or knocking noise from cylinder head during cold engine starts, typically lasting 5-30 seconds until oil pressure builds. This M271 camshaft rattling noise indicates worn camshaft lobes, timing chain stretch or VVT adjuster failure requiring immediate M271 intake camshaft inspection.
• Check Engine Light & Fault Codes: Common M271 camshaft symptoms include fault codes P0011 (Intake Camshaft Position Timing Over-Advanced), P0016 (Crankshaft/Camshaft Correlation), P0017 (Crankshaft/Camshaft Position Sensor Correlation Bank 1) indicating timing system problems.
• Rough Idle & Poor Performance: Worn M271 camshaft causes rough idle, hesitation during acceleration, reduced power output (particularly noticeable in Kompressor variants), increased fuel consumption and difficulty starting when engine is cold.
• Oil Leaks from Camshaft Seals: Premature inlet camshaft seal wear causes oil leaks visible on cylinder head front cover, often accompanied by oil consumption and smoke from engine bay during operation.

2. Root Causes of M271 Camshaft Failure

The M271 camshaft rattling noise and related failures typically stem from timing chain stretch (particularly in pre-2008 engines), inadequate lubrication from extended oil change intervals exceeding Mercedes-Benz specifications, use of incorrect oil viscosity grades or non-approved specifications, carbon buildup on VVT adjusters affecting hydraulic timing control and excessive engine temperatures in aggressive driving conditions. Early M271 engine versions are particularly susceptible to timing chain elongation that causes the chain to slap against components during startup, gradually damaging camshaft lobes and timing gear teeth. Selecting quality aftermarket camshaft for Benz M271 combined with timing chain system overhaul provides comprehensive solution to these notorious reliability issues.

Why Choose Our Aftermarket Camshaft for Benz M271?

• OE-Equivalent Quality Standards: Manufactured to genuine Mercedes-Benz specifications with identical dimensional tolerances, material composition and heat treatment processes. Every M271 intake camshaft undergoes comparative testing against OE samples to verify performance equivalence for Mercedes-Benz engine parts applications.
• Enhanced Durability: Superior surface hardening and precision grinding processes ensure this aftermarket camshaft for Benz M271 exceeds OE durability standards, particularly beneficial for high-mileage vehicles or those with previous M271 camshaft symptoms.
• Exceptional Value – 40-60% Savings: Offers OE-equivalent quality at competitive B2B pricing that delivers 40-60% cost savings compared to dealer Benz camshaft prices, significantly reducing total Benz M271 camshaft replacement costs for workshops and customers.
• Professional B2B Support: Volume pricing structures, flexible MOQ (Minimum Order: 2 pieces), fast European stock availability and dedicated technical support for Mercedes-Benz specialists, independent garages and parts wholesalers requiring Mercedes-Benz engine parts.
• Drop-In Replacement: Perfect OE fitment ensures this inlet camshaft 2710501401 installs without modifications across all M271 camshaft applications, minimising workshop time and eliminating fitment issues during engine camshaft replacement procedures.
• 12-Month Warranty: Comprehensive warranty coverage with hassle-free replacement procedures provides peace of mind on every M271 intake camshaft installation, protecting your investment in quality Benz engine parts.
• Complete Technical Documentation: Includes detailed installation procedures, torque specifications, timing chain alignment methods, VVT calibration instructions and troubleshooting guidance for professional Benz M271 camshaft replacement.

FAQ

1. Is this an OEM or aftermarket intake camshaft?

This is a high-quality aftermarket camshaft manufactured to OEM specifications, offering equivalent fitment and performance.

2. Can this camshaft replace A2710501401 directly?

Yes, it is a direct benz M271 camshaft replacement for OEM reference A2710501401 with no modification required.

3. Does this camshaft help solve M271 camshaft rattling noise?

In many cases, worn or damaged camshafts contribute to rattling noise. Replacing the intake camshaft during repair or overhaul can help resolve related M271 camshaft symptoms.

4. Is this intake camshaft suitable for engine rebuilds?

Yes, it is commonly used in professional engine rebuild and reconditioning projects.

5. Do you support bulk or B2B orders?

Yes, we specialise in B2B supply of Benz engine parts and support bulk purchasing and long-term cooperation.

6. What is the expected service life of this M271 intake camshaft?

Under proper maintenance conditions with quality engine oil meeting Mercedes-Benz specifications and appropriate service intervals (12-15,000 km), the A 271 050 14 01 M271 intake camshaft typically provides 200,000-300,000 kilometres of reliable service. Actual lifespan depends significantly on oil change frequency, timing chain condition, driving style and whether associated components like hydraulic tappets and timing chain are maintained properly. Vehicles used predominantly for short urban journeys with frequent cold starts may experience reduced M271 engine camshaft lifespan due to incomplete oil warm-up cycles and increased wear during cold operation.

7. How do I verify M271 camshaft compatibility with my specific Mercedes-Benz?

The M271 intake camshaft 2710501401 fitment depends on your vehicle’s exact engine code ( M271.820, M271.860) and production date. Provide your vehicle’s VIN (17-digit chassis number), model, year and current camshaft part number (stamped on camshaft end near timing gear), and we will verify M271 engine camshaft compatibility free of charge. Some CGI variants use different VVT adjuster configurations despite having compatible camshaft lobe profiles, making VIN verification essential for correct parts selection and avoiding installation issues.

8. What are the primary M271 camshaft symptoms I should look for?

Look for delayed engine starting, “Check Engine” lights with P0016 or P0017 codes, visible wear on the cam lobes, and decreased fuel efficiency.

9. Why is the A2710501401 Intake Camshaft prone to wear in M271 engines?

In the Mercedes M271 series, the intake camshaft can experience lobe wear due to oil starvation or high-mileage fatigue. This often leads to M271 camshaft symptoms such as poor timing and reduced volumetric efficiency. Our Aftermarket camshaft for Benz M271 is engineered with enhanced surface hardness to resist these common failure points better than standard replacements.

10. Can a faulty M271 intake camshaft cause “Limp Mode” or “Check Engine” lights?

Yes. A worn benz Camshaft often triggers “P0016” (Crankshaft Position – Camshaft Position Correlation) error codes. When the sensor detects that the Inlet Camshaft timing is off due to lobe wear or gear slippage, the ECU will limit engine performance. A professional benz M271 camshaft replacement is the only permanent solution to clear these codes and restore power.

11. Does replacing the intake camshaft solve the M271 camshaft rattling noise?

If the rattle is caused by scored lobes or high friction, a new engine camshaft will solve it. However, we suggest inspecting the camshaft adjusters (phasers) and the timing chain simultaneously. For a complete benz M271 camshaft replacement, many technicians prefer to update the entire valvetrain to ensure long-term reliability.

12. Can I buy a mixed pallet of Mercedes-Benz engine parts?

Yes, we specialize in B2B consolidated shipping. You can combine the A2710501401 Intake Camshaft with exhaust camshafts, valves, and timing kits for the M271, M272, or M274 engines to optimize your shipping costs and inventory turnover.

13. Do you offer technical support for professional installers?

Yes, we provide comprehensive technical support including installation guidance, torque specifications, timing procedures, and troubleshooting assistance. Our engineering team offers direct support to B2B partners to ensure successful installations and customer satisfaction.

14. How do I verify compatibility with specific engine codes?

Provide your vehicle’s VIN, model, year, and engine type, and we will verify compatibility free of charge to ensure you order the correct part.

15. What is your terms of delivery and payment?

EXW, FOB. Generally, 30% T/T deposit, and balance 70% T/T balance before delivery.

16. What is the ordering process and delivery time?

Please contact our sales team via the website or email for bulk pricing and quotations. Stocked items are shipped promptly, and special orders can be arranged with agreed delivery schedules.For the complete step-by-step ordering process, and our full terms, please view our Service Page.

Mercedes-Benz M271 Engine Applications – A2710501401 Compatibility

This A2710501401 M271 intake camshaft provides direct OE-equivalent replacement for the following Mercedes-Benz engine parts applications with M271 camshaft configurations:

Compatibility Verification Essential: This M271 intake camshaft A2710501401 fitment depends on your vehicle’s specific engine code, production date and existing part number. Always verify compatibility before ordering to ensure correct Benz M271 camshaft replacement. Contact our technical team with your VIN for free compatibility verification.